|
"Do you own a YZ400, YZ426 or YZ250f with an aftermarket pipe?
Have you melted the inside of the right knee on your expensive and
stylish race pants? If you're like us, then the answer is yes, and
you've wished for a heat shield that you could bolt on to solve the
problem. Well, here it is-or at least a prototype.
It's made of 304 stainless, so it'll never rust.
Plus, it's plenty stiff, so you will have to be pretty sadistic to
damage
it. It attaches easily to any head pipe similar to the White
Brothers and DSP units by way of 3 stainless steel hose clamps. Further,
the clamps have the highest corrosion resistance rating we could find,
so they should last a long time as well.
The shield is being race tested right now, but so far, it works
quite well. We're going make a few improvements, then try producing them
on a limited basis until we see what the demand is. If you're
interested, email Will Pattison at wpattison@ignition.com,
and we'll put you on the list. Once we get about 25 folks signed
up- hopefully in the next several weeks- we'll build a batch. Right
now, it looks like the price will be in the $40 neighborhood, plus any
shipping charges."
Pipe...$350
Shield...$40
Coolness factor...Priceless!
|
|
